top of page

Rotational Abrasion Tester

16.jpg

  • BGD 523 Rotational Abrasion Tester is applicable to determine abrasion resistance performance of various coatings. It is also used to determine abrasion resistance of paper, plastic, textile fabric, decorations, etc.

  • The principle of abrasion derived by the test sample, turning on a vertical axis, against the sliding rotation of 2 Abrading Wheels. The wheels are driven by the sample in opposite directions about a horizontal axis displaced tangentially from the axis of the sample. One of the abrading wheel rubs the specimen outward toward the periphery and the other wheel, inward to the centre. The area of abrasion from a pattern of crossed arcs of about 30sq.cm

  • The degree of abrasion for the specimen also depends on the load force（500g,750g or 1000g on each arm）being acted onto the axial of the 2Arms,which has a load pressure of 250g

  • It confirms to DIN 52347 53109 53754 53799
                             ISO 5470, 9352, 3573, 4586-2,7784-2
                             ASTM C217, D1044, D3389,D4060,D5342

Technical parametres

  • Platform speed：60±2r/min or 72±2r/min

  • Range of count： 0～9,999 times

  • Specimen size requirement：Φ100mm×Φ8mm（center hole）×3mm

  • Dimension of abrasive sheet：Φ50mm×Φ16mm（center hole）×13mm

  • Load weight：500g-750g-1000g

  • Main motor power：25W 220V 50Hz

  • Overall dimension： 320×280×254（length by width by height）

  • Net Weight：20KG

Ordering information

  • BGD 522---Rotational Abrasion Tester （for wood）

  • BGD 523---Rotational Abrasion Tester（for paint film）

  • CS-10---Taber Abrading Wheels

  • CS-17---Taber Abrading Wheels

  • CS-11---Taber resurfacing medium disc

  • BGD 1368---180 # Emery cloth stripe （pack of 100）

  • BGD 1372--- Fixing ring for soft specimen.

  • BGD 2601---Glass Panel with circular hole（pack of 100）

  • BGD 2328---Aluminum Panel with circular hole（pack of 100）

16_1.jpg

© xmark. 2019

bottom of page